Moldflow
Analysis
 Marathon
Mold is one of the few mold builders in the United States to own
and maintain a license of Moldflow
brand software. Using an STL
file this sophisticated mold filling software allows for an
analysis of the part, proposed runner and gate configuration to
be fully analyzed prior to any steel being cut.
 This
analysis will also show possible quality problems such as “air traps”
and “weld lines”. Moldflow Analysis is invaluable in determining
even whether a part will fill or not. In addition proper gate and
runner sizing can be determined for efficient use of materials and
insure lowest cost.
 After
analysis is run a complete report is generated and sent via internet
to the customer for review at their location. This service is provided
at “no charge” to our customers to insure a smooth project with
no suprises.
|
